For Use On Porous Surfaces

We developed this porous surface product, which works on more paints and does exceptionally well on removing marking pen for example on playground equipment. Specially formulated biodegradable graffiti remover to blast away graffiti off brick, concrete, slate, stucco,marble, granite, terra cotta, cinder blocks, terrazzo, cement, railroad cars, postal boxes, glass, wood & stone. Always test on hidden area before using.

 

How to use:

1. Spray or brush on Porous Surface Blaster.


2. Let Porous Surface Blaster soak for up to 30 min.


3. Pressure wash product and paint off surface.


As simple as that!

Porous Surface Blaster

C$82.00Price
Quantity & Size
  • Product Data on – Porous Surface Blaster Graffiti Remover

    GENERAL DESCRIPTION: Porous Surface Blaster is a biodegradable product formulated for use on porous surfaces of all types (also works great on many smooth surfaces. RECOMMENDED FOR REMOVAL ON: Brick, slate, mortar, masonry, cement, concrete, stucco, terrazzo, pavers, porous tile, Terra Cotta, cinder blocks, granite, marble, sandstone, rocks, both porous/rough or polished, Railroad Cars, Postal Boxes, glass, ceramic, porcelain, glazed tiles, grout and wood PRODUCT FEATURES/BENEFITS: • Unlike most products on the market, you do not need a second product to remove shadows! Just re-apply a second time and remove! • Low odour • Non – flammable • Works well in all temperatures; extend dwell time as temperatures drop. • Can be sprayed or brushed on. • Coverage between 300 to 1000sq.ft depending on surface and paint type.

    GENERAL INSTRUCTIONS: To blast away offending graffiti follow these simple steps: 1. Brush or spray Porous Surface Blaster onto the graffiti, work it in with a brush 2. Let it soak for 10 – 30 minutes. Soak time may vary depending on THE TEMPERATURE, the type of graffiti and the surface that it is on. If temperatures are below 0ºC, warm product & shake before applying. 3. Rinse off with pressure washer or garden hose; cold water can be used but best results are attained with hot water. Repeat process if necessary. 4. For marking pen always put the product on the rag & then rub the graffiti until all the marking pen is removed. Follow up with Cleansweep 2 to remove residue and neutralize product. 5. ALWAYS TEST ON HIDDEN AREA BEFORE APPLICATION!!

    GENERAL INSTRUCTIONS: To blast away offending graffiti follow these simple steps: 1. Brush or spray Porous Surface Blaster onto the graffiti, work it in with a brush 2. Let it soak for 10 – 30 minutes. Soak time may vary depending on THE TEMPERATURE, the type of graffiti and the surface that it is on. If temperatures are below 0ºC, warm product & shake before applying. 3. Rinse off with pressure washer or garden hose; cold water can be used but best results are attained with hot water. Repeat process if necessary. 4. For marking pen always put the product on the rag & then rub the graffiti until all the marking pen is removed. Follow up with Cleansweep 2 to remove residue and neutralize product. 5. ALWAYS TEST ON HIDDEN AREA BEFORE APPLICATION!!

Our products contain no phosphates, chlorinated hydrocarbons or products known to cause health or disposal problems. Most of the products can be wiped off with recycled cloths. We don't use spray cans with CFC's. We also use less product than anybody else on the planet to get the job done.

Contact Us

Unit 2, 4415 64 Ave SE

Calgary, Alberta

T2C 2C8

Steve Van Den Berge

Ph: (403)-461-9023

steve@goodunderpressure.com

Brent Trevors

Ph: (403)-660-6303

brent@goodunderpressure.com

© 2018 by LookAtThisDesign.ca